Products, Parts, Accessories
Manual Valve and Parts
Power Valve and Parts
Aqua-Pro Battery Watering
Rear Vision Systems
Vintage Bluebird Parts
Primus Furnace Parts
Sporlan Valves and Parts
Primus 2490 Furnace Parts Diagram
Manual Valve Breakdown
Power Valve Breakdown
$0 - $25
$25 - $50
$50 - $100
$100 - $250
$250 - $500
$500 and up
You are here:
Vintage Bluebird Parts
Price: Low to High
Price: High to Low
10 per page
20 per page
40 per page
60 per page
100 per page
Dashbord Rocker Switch
Replacement Dashboard Switch
Microphor Toilet Cam
Replacement Cam for Microphor toilet.
Made from Aluminum, Much more durable than original plastic cam.
Adjustable, Cycle can be changed to users preference.
Replacement Inverter for Electroluminescent Dash Panels
Illuminated Exterior Grab Handle
Grab handle for entry door.
Illuminated lucite handle
"Wanderlodge" engraved on handle
M380/450 Radio/Rear View Monitor Panel Bezel
Replacement Radio Rear view monitor Panel Bezel. Pattern closely resembles original equipment woodgrain. Thickness .25" as opposed to .19" for original.
Due to vaying sizes of radios and monitors, this panel is a "blank" and will require the user to cut the proper sized holes for the radio and/or rear view monitor.
Panel Retaining Strips
Each order consists of 10 Strips
Panel Retaining Strips used on FC and PT (narrow-body) coaches
Strips are 90" long and 1˝" wide
Made from OEM die-exact replacement part
Packaging charge of $3.00 per bundle included in price
Solenoid used to control air-powered entrance steps. Also used for control of air slides on generator bays. Use exhaust fittings from old solenoid.
M380/450 Switch Bezels
Complete set of Switch Bezels. Pattern closely matches original equipment. Bezels are .25" thick as opposed to .19" of the original.
M380/450 Dash Panel Bezel
Replacement Dash Panel Bezel. Pattern closely resembles original equipment. Thickness .25" as opposed to .19" for original.
M380/450 Lower Ball Joint Boots
Replacement Lower Ball Joint boots for M380/450 IFS suspension
Boots are of a two-piece design allowing installation without removing joint.
Can even be replaced without lifting front end.
Kit comes complete with instructions, glue for boot seams, disposable gloves, stainless steel tie wraps, and 2 complete boots
Does not include ball joints
Become an Affiliate
Copyright © 2007 1736063 Ontario Limited. All Rights Reserved.